# Golden Tec Machinery Co., Ltd.

> Golden Tec Machinery Co., Ltd. (金益興機械股份有限公司) designs and builds rotary sheeters that cut paper, carton board and film from reels into sheets. Based in Taichung, Taiwan, building sheeters since 2000. Reel widths 1,400 and 1,700 mm; 60–650 gsm; cut-off accuracy down to ±0.3 mm; up to 300 m/min.

Golden Tec sheeters are installed in 23 countries: Taiwan, China, South Korea, United Kingdom, Vietnam, Malaysia, Thailand, Indonesia, Myanmar, India, Russia, Germany, Turkey, Lebanon, Egypt, Saudi Arabia, United Arab Emirates, South Africa, Nigeria, Mexico, Australia, Sri Lanka, Singapore.

## Machines
- [TKSC Single Rotary Sheeter](https://www.goldentec.com.tw/machines/tksc): 60–550 gsm, ±0.5 mm, up to 300 m/min. Best price/performance for regular paper, board and film.
- [TNSC Multi-Web Single Rotary Sheeter](https://www.goldentec.com.tw/machines/tnsc): 60–550 gsm, ±0.5 mm, up to 300 m/min. Cuts several webs at once for 4–6× output on fine and text grades.
- [TW Synchro Rotary Sheeter](https://www.goldentec.com.tw/machines/tw): 120–650 gsm, ±0.3 mm, up to 300 m/min. Synchro knife for heavy board and tight tolerances, with a quieter cut.
- [GTM Compact Single Rotary Sheeter](https://www.goldentec.com.tw/machines/gtm): 160–550 gsm, ±0.5 mm, up to 200 m/min. The short version of the TKSC: a compact 6.9 m line for art paper, board and film.
- [CSZ Cut-Size Sheeter](https://www.goldentec.com.tw/machines/csz): 75–120 gsm, ±0.5 mm, up to 300 m/min. Slits and cuts the reel into counted stacks of 70–500 sheets, 3, 4 or 5 stacks across the width, conveyed straight to a packaging line.
- [Machine specifications (JSON)](https://www.goldentec.com.tw/machines.json): all models, machine-readable

## Optional equipment
- [Lateral pallet exchange system](https://www.goldentec.com.tw/options#lateral-pallet-exchange): Sheeter pause required. In the layboy the pallet sits on a steel plate that lowers as the pile grows. When the pile is full, the sheeter pauses: the plate lowers onto transfer chains, which carry the full pile out to the drive side while a prepared steel plate and empty pallet move in from their ready position under the operator walkway and lift to stacking height. At the drive side the full pile is taken away, a new empty pallet goes onto the plate, and the chains return it under the running pile to the ready position under the operator walkway.
- [Cut-to-register (RGT)](https://www.goldentec.com.tw/options#cut-to-register): ±0.3 mm on the print mark For pre-printed rolls and films, RGT cuts on the print mark so every sheet lands on register. Suited to large runs of beer labels, paper-cup stock and other printed work.
- [Inline defect inspection and reject system](https://www.goldentec.com.tw/options#inline-defect-inspection): For Golden Tec sheeters only. Checks the full web width while the line runs, finds and classifies surface defects automatically, and rejects the affected sheets after the cut, so only good sheets reach the pile. Operators see each defect on screen as it happens, and every run keeps a defect record with images for your quality reports. Inspection data stays on your premises.
- [Inline embossing](https://www.goldentec.com.tw/options#inline-embossing): Up to 1,000 mm wide The embossing unit sits between the unwind and the slitting station. The web runs continuously through the embossing rollers and straight on to slitting and cutting, so no separate embossing pass is needed. Working width is up to 1,000 mm (39"). Maximum speed is 100 m/min (330 ft/min); the actual speed depends on the material and its thickness. Inline embossing can be combined with cut-to-register (RGT), the inline defect inspection and reject system, and the lateral pallet exchange system.

## Applications
- [Board sheeter for folding-carton converters](https://www.goldentec.com.tw/applications/folding-carton): 200–450 gsm coated board. Buy board on the roll and sheet it in-house to the exact size each job needs.
- [Multi-web sheeter for paper mills and merchants](https://www.goldentec.com.tw/applications/paper-mills): 60–120 gsm fine and text paper. Run several webs at once and multiply output on light grades.
- [Cut-to-register sheeter for pre-printed rolls](https://www.goldentec.com.tw/applications/printed-rolls): Pre-printed paper and board. Labels, cup stock and printed packaging cut exactly on register.
- [Roll-to-sheet cutter for film and laminates](https://www.goldentec.com.tw/applications/film): PET, PP and laminated board. Sheet film and laminates in-house, to the size each job needs.

## Buyer's guide
- [Rotary sheeters explained](https://www.goldentec.com.tw/sheeter-guide): What is a rotary sheeter? What is the difference between a single rotary and a synchro rotary sheeter? Which sheeter should I choose for my basis weight? What is multi-web sheeting? What is a cut-to-register sheeter? How accurate is a rotary sheeter? What reel widths do Golden Tec sheeters handle? What information do I need to get a sheeter quote? Who makes Golden Tec sheeters and where?

## Contact
- [Request a quote](https://www.goldentec.com.tw/contact): send material, gsm, reel width and sheet size; an engineer replies within one working day
- Phone: +886 4 2693 6636
- WhatsApp: +886 4 2693 6636 (https://wa.me/886426936636)
- Email: gtm@goldentec.com.tw
- Address: No.42, Chuantou 2nd Street, Dadu Dist., Taichung 43246, Taiwan